Why Is My Airsoft Gun Not Shooting

In that location may exist a number of reasons why your airsoft gun wont shoot. The reasons range from elementary wiring bug to more than serious ones like gears with broken teeth.

Reasons Why Airsoft Gun Wont Shoot

Get-go, here are a few reasons why an airsoft gun wont shoot:

Reason 1: Yous Used Depression Quality BBs

Low quality Bbs can damage your airsoft Gun in many means. The beginning one is that a poorly made airsoft BB leaves fragments within your airsoft gun and this will cause the gears to beginning jamming upwardly and breaking.

The other way that poorly made airsoft Bbs damage airsoft guns is reducing the accuracy of the trajectory of your shot. This happens when BBs that accept seams scratch the barrel and start deforming it. With enough wear and tear, the butt starts pointing your BBs the wrong management.

Choosing the right Bbs will extend the lifespan of your airsoft gun and reduce the number times that it jams

How to Ready This

Apply loftier quality BBs: The all-time quality Bulletin board system are double polished and accept no seams. They need to be perfectly round and have consistency from BB to BB. Cheap bbs come with a lot of inconsistencies and seams on the bb trunk.

A good way of testing for consistency is picking a handfull of BBs from the purse and looking carefully at each bb for imperfections. Brands with a low number of BBs that are deformed are the best to use.

The best BB brands are perfectly smoothen and take no seams. This prevents them from scratching the inner barrel of your airsoft gun and changing the internal dynamics of how your gun shoots.

Making sure that y'all accept the right BBs for your gun also helps to forbid jamming. If your gun uses a metallic gearbox, you will need to use 0.20gram BBs or higher.

Hither is a short video by John Douch on why y'all should non employ cheap bbs

Reason ii: Yous Blew a Fuse

If your gun does zippo when you pull the trigger, even on a full charge, its possible that you lot have blown the fuse to your gun.

Ane reason for this happening is when the gears jam and the gun trys to send too much energy to free up the gun.

Another problem is the wiring tangling together with the motor pinion causing a curt circuit. When two wires that are not supposed to touch come up into contact, this will cause a brusk circuit.

The other reason may be that y'all are using the wrong fuse for your gun. Bank check with the manufacturer to notice out the advisable fuse for your gun if this is the problem.

How to Fix a Broken Fuse on an Airsoft Gun

Here is a video explaining where to find your airsoft gun'south fuse and how to supervene upon it.

You lot can tell that a fuse is blown by checking if the wire going through the fuse is all connected. If it is broken or discolored, then is probably blown. Another way to bank check if it its the fuse is to connect the ii ends without the fuse and attempt to shoot the gun. If it shoots ,then yous know that information technology is the fuse.

A blown fuse is likely the symptom of a bigger problem. If the problem keeps recurring, you will need to investigate further to observe the root cause.

If the trouble is wiring short circuiting, you will need to do rewiring of the airsoft gun. This tin can be a daunting chore and here is a video that volition give you an thought of what is involved.

Reason 3: Burnt Trigger Contacts

This normally happens when black rest builds up on your trigger contacts. This is due to arcing that happens on the trigger contacts. Single fire puts a lot of carbon on the trigger contacts due to arcing. This is usually over a long catamenia and the gun may work fine for a while but when the carbon builds upward, the gun may eventually stop working.

How to ready burnt trigger contacts on your airsoft gun

This is really a quick prepare: accept apart your gun and make clean the tips with a soft damp fabric. Make sure everything is dry before assembling the airsoft gun back together.

When cleaning the gun doesn't help, and then you lot can try the solution given by Jeffie Jeff. This will involve replacing the contacts so please read upwardly on how to replace the contacts in your own airsoft gun before you open up up your airsoft gun.

Other Reasons

Reason 4: Worn Out Motor Brush Springs

Reason 5: Cut Wires on the Airsoft Gun

Reason 6: Locked/Jammed Gearbox

Reason 7: Cleaved Gears

Reason 8: Burnt Trigger Contacts

Reason ix: Stripped Piston